EN AW1350 is a non-heat-treatable aluminum alloy. Composed of a minimum 99.5% aluminum. Cold working increases its strength. Often used for electrical conductivity.
Aluminum Alloy 1350 is a high (99.5% min.) aluminum-content alloy with small additions of silicon, iron, copper, manganese, and other elements. Alloy 1350 is highly conductive and has good formability, leading to its use in electronics and other applications.
Alloy 1350 is primarily used in the manufacture of electrical conductors, and -H111 temper exhibits the highest electrical conductivity of all extruded aluminum conductor grades, meeting or exceeding 61.0% IACS.
Aluminum 1350A (99.5% Al min) has excellent formability and corrosion resistance and is the alloy of choice for electrical conductors
1350 o aluminum coil sheet is a commercially pure, very ductile in extruded condition
Aluminum alloys 1050 and 1350 do have one specific difference in where the chemical composition of 1050 has a slightly higher max on its silicon content than 1350. It is a very small difference and they are both present as maximum values, but the small difference could affect critical applications
1350 aluminum alloy sheet is used in various applications but its main uses are electrical conductors，pins, rods, and rivets.
| Chemical Composition Limits | ||||||||||||
| Weight% | Si | Fe | Cu | Mn | Mg | Cr | Zn | B | Ga | V+T | Cr+Mn+Ti+V | Others |
| 1350 | 0.1 | 0.40 | 0.05 | 0.01 | - | 0.01 | 0.05 | 0.05 | 0.03 | 0.02 | - | 0.03 (each) 0.10 (total) |
| 1350A Germany | 0.25 | 0.40 | 0.02 | - | 0.05 | - | 0.05 | - | - | - | 0.03 | 0.03 (each) |
| Material | Temper | Tensile Strength (N/mm²) | Elongation in 50mm |
| 1350 Bar | M | 60 min | 23 |
| 1350 Bar | H2 | 85 (min) | 13 |
Aluminum sheet is any aluminum sheet metal thicker than foil but thinner than 6mm; it comes in many forms including diamond plate, expanded, perforated and painted aluminum sheet. Aluminum plate is any aluminum sheet metal that is thicker than 6mm
Temper of aluminum sheet: O, H, W, F, T
H:H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H111, H112, H114, H116
T: T0-T651
Size of aluminum sheet
Thickness:0.2-6.0mm
Width:100-2400mm
Length:200-11000mm
Mother coil: CC or DC
Weight: About 2mt per pallet for general size
MOQ: 5-15 ton per size
Protection: paper inter layer, white film, blue film, black-white film, micro bound film, according to your requirement.
Surface: clean and smooth, no bright speck, corrosion, oil, slotted, etc.
Standard product: GBT3880, JIS4000, EN485, ASTM-B209
Delivery time: about 30days after receiving the deposit
Payment: T/T, L/C at sight
Trading terms: FOB, CIF, CFR
Application of aluminum sheet
Aluminum sheet is used in construction material and building material. Including: roof panel, ceiling, in-wall, partition wall, shutters, window blind, gate, balcony, wall, road marking, street signs, road protecting plate, highway protecting plate, bridge carrier wall, scaffold, ship plate, etc.
Aluminum sheet is used in electric machine components. Including: protective plate, protective box, capacitor box, tank of power capacitor, electrolytic condenser, variable of battery, volume shaft, loudspeaker framework, switch plate, semi-conductor radiator, magnetic disk, motor frame, fan blade, electric cooker, cooling fin, heat sink, etc
