Stainless steel checker plate or stainless diamond sheet, also known as stainless floor sheet or stainless steel tread plate, stainless thread sheet, has a raised diamond lug pattern, functioning skidproof and anticorrosive.
Our company Top Metal Manufacture aims to provide customers with different patterns. We can manufacture diamond sheet according to ASTM A793.
In Top Metal, the diamond plates are always inventoried in 304(L), and 316(L). 2B finish and No.1 finish stainless steel diamond sheet are both available.
Stainless steel checker plates are widely used in trailer and truck bed flooring, running boards, walkways, and platforms, etc., the thickness of which we produce ranges from 0.3mm to 12.0mm. It is easy to weld, cut, form, and machine. For metal, we are serious.
| Specification | |
| Size | Thickness: 0.3 ~ 12.0 mm; Width: 1000 ~ 3000mm; Length: 2000 ~ 6000mm, or as Request. |
| Techniques | Cold Rolled, Hot Rolled |
| Surface | 2B, No.1 |
| Mill of Origin | Top Metal, Baosteel, ZPSS, TISCO, JISCO, ATI, SMC, HAYNES, VDM, ArcelorMittal, Outokumpo, etc. |
| Theoretical Weight(kg/m) | Weight/meter = T*W*L*7.93(7.98) T in mm,Both W and L in m. |
Note:
L is the specified length.
W is the specified width.
T is the specified thickness
Main Grades and Standards
1.Standards:
ASTM A793
2.Materials(Grade):
304, 304L, 316, 316L
3.Pattern
Pattern A: percent of reduction, 61%.
Pattern B: original of raised figures approximately 1-1/4 in., percent of reduction 61%.
Pattern C
Chemical Composition of Stainless Steel Checker Plate
| Type | C≤% | Mn≤% | P≤% | S≤% | Si≤% | N≤% | Ni % | Cr % | Mo % |
| 304 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 0.10 | 8.00-10.50 | 18.00-20.00 | … |
| 304L | 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 0.10 | 8.00-12.00 | 18.00-20.00 | … |
| 316 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 0.10 | 10.00-14.00 | 16.00-18.00 | 2.00-3.00 |
| 316L | 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 0.10 | 10.00-14.00 | 16.00-18.00 | 2.00-3.00 |
This material shall conform to the requirements of one of the grades listed in the above table. Annealing shall be the last heat treatment to which the material is subjected by the manufacturer.
Tolerance over Specified Width and Length, mm.
Note: Any other ordered thickness may be subject to agreement between purchaser and seller.
| Specified Dimensions | Tolerances | ||||
| Thickness Under 9.5mm | Thickness 9.5 to12.7, mm | ||||
| Width | Length | Width | Length | Width | Length |
| 1219 and Under, mm | 6096 and under, mm | 3.2mm | 4.8mm | 4.8mm | 6.4mm |
| Over 1219 to 1524, mm | 6096 and under, mm | 4.8mm | 6.4mm | 6.4mm | 7.9mm |
With moderate price and good comprehensive performance, 304 stainless steel checker plate is widely evaluated in general building decoration, industrial equipment and other fields.
Especially in situations where the requirements for corrosion resistance are not particularly high, 304 stainless steel checker plate is the most important choice.
316 stainless steel checker plate is more suitable for use in more advanced corrosive environments, such as marine engineering, chemical equipment and other fields.
In addition, due to its excellent high temperature resistance, it is also used in some equipment and structural parts in high temperature environments.
304 stainless steel checker plate is also widely used in chemical, petroleum, food, medicine, paper and other industrial fields. It can be used as protective panels, platform boards, pedals and other parts of equipment, and has good anti-corrosion and anti-slip properties.